Vulnerability · CVE-2015-5374
PROFINET IO for EN100 Ethernet Module Denial of Service
Published Jun 12, 2017 · corrected/updated Jun 12, 2017 · Siemens siprotec_firmware · evidence confidence very high
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02. Specially crafted packets sent to port 50000/UDP could cause a denial-of-service of the affected device. A manual reboot may be required to recover the service
Grounded briefings
Catalog interpretations for three audiences. Each brief cites ingested metadata and the original advisories below. They are not independent research and they do not invent exploit steps.
Executive
CVE-2015-5374 is a unknown public vulnerability record for Siemens siprotec_firmware. CISA lists it as known exploited. Published remediation guidance: Apply remediations or mitigations per vendor instructions or discontinue use of the product if remediation or mitigations are unavailable. This summary is a catalog interpretation of the ingested metadata and cites the original advisories below.
System administrator
Identify whether Siemens siprotec_firmware is in your estate, then compare installed versions with the affected ranges. Affected packages or ranges on record: Siemens siprotec_firmware. Published remediation guidance: Apply remediations or mitigations per vendor instructions or discontinue use of the product if remediation or mitigations are unavailable. Prefer the vendor or distribution advisory linked in Sources before changing production systems. This is a catalog interpretation, not a runbook.
Security analyst
Signals on file: no CVSS/EPSS yet. CISA lists it as known exploited. Sources contributing to this record: cve_org, vulncheck_kev. Public exploit references, when present, are outbound links only and are not proof of active exploitation. This is a catalog interpretation of stored metadata.
Exploitation and remediation
Exploitation evidence
Confirmed in CISA KEV since Jun 12, 2017. Listed in CISA KEV and VulnCheck KEV.
Patch and remediation
Apply remediations or mitigations per vendor instructions or discontinue use of the product if remediation or mitigations are unavailable.
Safe detection guidance
Compare installed versions with the affected ranges below and verify the advisory from the original publisher. This site stores metadata and outbound links only; it does not ship exploit code or proof-of-concept payloads.
Code
The project this record applies to. Exploit listings stay in References.
No public source repository is identified for this product.
Timeline
Detection, updates, and resolution for this record.
Jun 12, 2017 · VulnCheck KEV
Detected
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merg
Jun 12, 2017 · CISA KEV
Known exploited
Apply remediations or mitigations per vendor instructions or discontinue use of the product if remediation or mitigations are unavailable.
Affected
- vendor Siemens siprotec_firmwareversion unspecified
Sources
- CVE.orgVulnerability recordCVE-2015-5374
Official CVE identifier
cve.org - VulnCheck KEVConfirmed exploitationCVE-2015-5374
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Fi
vulncheck.com